亚洲精品国产精品乱码不卞,天天操夜夜夜,久久天天躁夜夜躁狠狠,91仓本c仔约高挑嫩模在线,高清美女视频免费,杨幂13分钟无删减版视频,美女视频黄频大全不要钱

In order to improve the various properties of aluminum, various alloying elements need to be added to make alloys of different brands. At present, the domestic basically adopts alloy or pure metal to join. Some domestic aluminum processing plants have used metal additives to replace master alloys. From the use effect, it can be seen that the additives not only have all the advantages of master alloys, but also overcome some of the disadvantages of master alloys. Therefore, additives are more and more widely used.

Metal additive application: alloy element addition in aluminum alloy smelting.

Advantages of metal additives:

Additives: Aluminum and aluminum alloy additives are far superior to master alloys due to its 8 addition mechanism and convenient use method, stable element yield and economical production methods. It avoids that the melting temperature is too high, which causes the life of the melting furnace to be reduced, increases the burning loss of aluminum and alloy elements, and reduces the melting productivity, and worsens the working conditions. More serious is the uneven composition of the master alloy, which brings a series of difficulties to the control of the alloy element content in the future. For most civilian aluminum alloys, it is an ideal material to replace master alloys.

Instructions for use of aluminum and metal additives:

Aluminum and metal additives can be added directly to the melting furnace or the holding furnace, but they must be added before refining. In order to achieve the desired actual yield of alloying elements, other matching conditions are required. The specific instructions are as follows:

Due to the pure metal addition mechanism, the absorption rate of alloying elements always increases with the increase of temperature. Field experience has proved that aluminum and aluminum alloy additives are sensitive to temperature, especially manganese. The temperature of the molten aluminum should be controlled at 740±10℃ and the additives should be added, otherwise the metal absorption time will be prolonged.